Overclocking Computers with Intel Pentium II

Computer with Pentium II 300 MHz

Pentium II processors with a clock frequency of 300 MHz operate well in over-clocked modes. Overclocking will be particularly successful if such processors are used with motherboards that have built-in overclocking capabilities. The best motherboards include Abit BX6. This particular motherboard allows very high performance to be achieved.

The following results came from overclocking and testing a computer with a Pentium II 300 MHz processor and an Abit BX6 motherboard. Overclocking parameters were set using BIOS Setup in CPU SoftMenu II.

Testing the System

The following WinBench 99 tests were conducted: FPU WinMark (Fig. 18.1) ^[1], business disk, and high-end disk. (See Figs. 18.2–18.4 and Tables 18.1 and 18.2.) Unfortunately, the CPUmark 99 test could not be loaded, presumably because of instability of the operating system used in the test (Windows 98).

Table 18.1: Results of Overclocking Pentium II 300 MHz

WinBench 99 test	300 MHz ≈ 66 × 4.5	450 MHz = 100 × 4.5
FPU WinMark	1,540	2,310
WinMark 99 business disk (1,000 bytes/sec)	1,910	1,940
WinMark 99 high-end disk (1,000 bytes/sec)	5,630	5,930

Table 18.2: Results for Pentium II 300 MHz (high-end disk, 1,000 bytes/sec)

WinMark 99 high-end disk	300 MHz ≈ 66 × 4.5	450 MHz = 100 × 4.5
AVS/Express 3.4	3,800	4,000
FrontPage 98	27,600	31,100
Photoshop 4.0	4,090	4,330
Premiere 4.2	3,950	4,340
Sound Forge 4.0	6,130	6,290
Visual C++ 5.0	6,390	7,420

Figure 18.1: Pentium II 300 MHz processor performance (FPU WinMark)

Figure 18.2: Pentium II 300 MHz hard-disk performance (WinMark 99 business disk)

Figure 18.3: Pentium II 300 MHz hard-disk performance (WinMark 99 high-end disk)

Figure 18.4: Pentium II 300 MHz test results (WinMark 99 high-end disk)

Computer with Pentium II 333 MHz

Pentium II 333 MHz is one of the most popular processor models. It shows good results in tests and is one of the best representatives of the Pentium II product line.

Pentium II 333 MHz shows high overclocking results. It is possible to overclock this processor to 416 MHz (5 × 83 MHz).

With some motherboards that support higher frequencies of the host bus (such as 92 MHz or 95 MHz), it was possible to overclock this processor to 460 MHz. However, at these frequencies, additional cooling of the processor and other hardware components is required.

Processor overclocking was accomplished by raising the system-bus frequency from 66 MHz to 95 MHz. At system-bus frequencies of 83 MHz, 92 MHz, and 95 MHz (relatively high for products of this class), computer operation was unstable. At frequencies of 92 MHz and 95 MHz, the system often hung up during the tests, even with an improved cooling system. It was possible to ensure stable operation of the system only by increasing the CPU core voltage 0.1 V.

WinBench 98 was used for testing.

Test results (Table 18.3 and Fig. 18.5) show significant growth of overall system performance, achieved by processor overclocking. However, as previously mentioned, system operation was unstable at high system-bus frequencies of 83 MHz, 92 MHz, and 95 MHz (416 MHz, 460 MHz, and 475 MHz processor frequencies) without an appropriate increase in CPU core voltage.

Figure 18.5: Pentium II 333 MHz test results

Without increasing the CPU core voltage, the optimal and most recommended mode is 375 MHz (5 × 75 MHz). With increased CPU core voltage, the optimal mode is 416 MHz (5 × 83 MHz).

As usual, when overclocking the processor, it is necessary to carefully consider efficient cooling.