Many, many Unix commands are available, and there is no way you can do more than scratch the surface in this small chapter. However, you can learn how Unix commands work in general by trying some specific examples of useful Unix commands.
To learn about references in which you can learn more Unix commands, see "Learning Unix," p. 230.
Each of the following sections provides information about specific commands. For each command, you will see four areas of information about that command. First, you will read a general description of what the command does. Second, you will see the command's syntax and some of the useful options for that command. Third, you will see a more specific description of the command's effect. Fourth, you will see the steps you can take to use the command.
For the commands in this section, you won't see all or even many of the options that are possible for each command. You will need to access a more detailed reference for that kind of information, such as the command's manual pages.
When you are troubleshooting, it can be helpful to understand the environment in which you are running Unix. You can use the uname command to get information about the computer on which you execute the command. Or, you might need to check this information to make sure some software or hardware is compatible with your system.
Options: -a provides all the information about your machine; -s shows the operating system name; -n lists the machine name
What it does: Provides information about various aspects of the machine on which you are running Unix
Launch the Terminal application and at the command prompt, type uname -a and press Return. You will see various items of information about your machine, such as the core operating system (Darwin), hostname (localhost), version of the kernel you are running, and so on (see Figure 9.3).
Type uname -s and press Return. You will see only the core operating system (Darwin).
Type uname -n and press Return. You will see the name of the machine hosting the Unix session.
What it does: Provides extensive information about your Unix session (your Unix environment)
Type env and press Return. You will see information including your Home directory, the shell you are running, the username you are using, the language being used, the application you are using to enter Unix commands, and so on. This information can get pretty extensive; scroll up the window to just below where you entered the command to see the more meaningful parts.)
You will frequently need to move up and down the directory structure to work with specific files or other directories. Unix has many commands that enable you to do so.
What it does: Shows you the full path to your current location
Use the pwd command when you aren't sure about the directory in which you are currently located. When you use the command, you will see the full path in which you are working. This can be helpful as you move around the directories if you become confused about where you are.
Command: cd pathname
What it does: Changes your directory location to the one in the path pathname
When a specific command is listed in a step, you should ignore the period at the end of the command. For example, in the following steps, don't type the period after the command cd music in Step 1.
Type cd Music. The prompt will change to [localhost:~/Music] to indicate that you are in the Music directory in your Home directory.
Remember that the ~ represents your Home directory, so ~/Music means that you are in the Music directory that is within your Home directory. This can help you take some shortcuts when entering paths as you will see in the next step.
Also remember that the forward slash (/) in a path indicates a change in level in the hierarchy. If you are in your Home directory and type cd /Music, you will get a message telling you that no such directory exists. When you enter the forward slash, Unix looks back to the highest level in the structure and there is a directory called Music in that directory. Leaving the / out indicates that Unix should look in the current directory, which is where the directory is actually located.
Type cd /Users/shortusername, where shortusername is the short username for your account. This will move you back into your Home directory. You include the /User/ because you are moving above the Music directory and so need to include the full pathname.
In a pathname, the tilde character (~) indicates that you are in your Home directory. In the previous step, you could have just entered cd ~ to move back into your Home directory.
Options: -F differentiates between files and directories; -l shows full information for all the files in the directory
What it does: Lists the contents of a directory in various formats and with various information
Note that while most commands and options are in lowercase, they aren't always. For example, the -F option is different from the -f option (both are valid for the ls command).
Use the cd command to move into the directory of which you want to see the contents.
Type ls. You will see a multiple-column view of the directory; files and directories are listed by name.
Type ls -F. You will see the same list as before except that now directories are indicated by a / after their names.
Type ls -l. You will see the contents of the directory listed along with plenty of information about each file and directory within the current directory. If there are many items, the information will scroll so quickly that you might not be able to see all of it. This is a good opportunity to see an example of piping two commands together.
Type ls -l | more. This time, the same list will appear, but the display will stop when the screen is full and you will see the more prompt at the bottom of the window. Press the spacebar to see the next screenful of information (see Figure 9.4). You can also scroll the window using the scrollbars to see all the items in the window.
If you type the command ls ?la, you will also see the invisible files in a directory.
The permissions string you see at the start of each item in the full listing indicates how the item can be accessed. The first character indicates whether the item is a file (-) or a directory (d). The next three characters indicate what the owner of the file can do; r is for read, w is for write, and x is for execute. If any of these characters is the hyphen (-), that action can't be taken. The next three characters indicate the permission that the group has to the file. For example, if these characters are r-x, that would mean that other members of the group can read, not write, and execute the file. The last three characters indicate what everyone else can do.
The execute permission applies to a directory. In order to access a directory, you must have both read and execute permission. If you also have w permission, you can change the contents of the directory as well.
Command: file filename
What it does: Indicates what kind of file filename is
Type file, followed by the filename you would like information about, and press Return. Information about the file will be displayed.
You can use Unix commands to change the contents of directories as well. For example, you can delete files using the rm command. This can sometimes be faster than using the Trash. Once in a while, you might not be able to use the Trash to get rid of a file; you can often use the Unix commands to accomplish the task when other means fail.
Options: -i prompts you before deleting each file; -r removes the entire directory
What it does: Deletes everything that you indicate should be deleted
Use the cd and ls commands to find a file you want to delete.
Type rm filename, where filename is the name of the file you want to delete, and press Return. The file will be deleted.
Type rm -i filename and press Return. You will be prompted about removing the file; type Y to remove the file or N to cancel.
Type rm -r directoryname, where directoryname is the name of a directory you want to delete, and press Return. The directory and all its contents will be deleted.
You can't remove the current directory unless you enter the full path to it.
The asterisk is a wildcard character. For example, to delete all the files in a directory that have the file extension .tiff, you can type rm *.tiff.
What it does: Copies a file
Type cp filename filenamecopy, where filename is the name of the file you want to copy and filenamecopy is the name of the file to which it will be copied, and press Return. The first file will be copied into a new file that has the second name you typed.
Type cp filename path, where filename is the name of the file you want to copy and path is the location in which you want the copy to be created and press Return. A copy of the file will be placed into the location you specified.
What it does: Moves a file or directory
Type mv filename path and press Return. The file or directory filename will be moved to the location path.
What it does: Creates a directory
Use the cd command to move into the directory in which you want to create a new directory.
Type mkdir directoryname and press Return. A new directory with the name directoryname will be created in the current directory.
All Unix commands have a manual associated with them. This manual lists the syntax for the command and defines its options; manuals can be a good reference when you are using a specific command, but can't remember an option or the command's exact syntax. Many manual pages also provide some explanation about how the command works.
What it does: Brings up the manual pages for the command that you enter
Type man ls and press Return. The manual pages for the ls command will appear (see Figure 9.5).
Use the spacebar to move to the next page.
Continue reading the manual pages until you have the information you need.
It is a good idea to take a look at the manual pages for any Unix commands you use. Pay special attention to the list of options that are available for the command.
Some Unix applications provide manual pages using the help argument. For example, perl--help brings up information about the perl application.
Pressing the spacebar moves you down the manual page one screen's worth at a time; you can move down a manual page one line at a time by using the Return key instead.
As you learned earlier in the book, the root account is the fundamental user account that can do anything under Mac OS X. The root account has more access to the system than even an Administrator account does. Using this account can be hazardous to your system because when you are under root, the OS assumes that you know what you are doing and doesn't provide any checks on your activities. It is relatively easy to delete things you don't mean to or to mess up the system itself.
By entering the root account, you can do damage to your system. You should use this only when you really have to, and even then, you need to be very careful about the commands you enter while you are working on the root prompt.
However, when you need to use a specific command at a specific time that you can't do under another user account, it can be helpful to enter commands as root.
Option: -s, which runs the command in the default shell
What it does: Gets you into the root account so that you can enter a command that you can't enter under another account
For help activating the root account and creating a password for it, see "Logging In As Root," p. 206.
Open a new shell window. The prompt will show the short name of the user account you are logged in under.
Type sudo -s and press Return. If you are using the sudo command for the first time in a session, you will see a warning regarding what you are about to do and will be prompted to enter your password; enter your root password and press Return. If you have logged in as root previously, you won't have to enter the password again. When the sudo command is successful, the prompt will show that you are logged in as root (see Figure 9.6).
To return to the previous account, type exit and press Return.
When a process goes wrong, it can cause problems, such as hanging, or it might start consuming tremendous amounts of processing power, thus bringing your system's performance to a crawl. Under Mac OS X, there are several ways to stop an out-of-control process. For applications, you can use the Force Quit command. At the process level, you can use the Process Viewer to force a process to quit. You can also use the powerful Unix command kill to stop a running process.
Command: kill ProcessID
Options: -9 kills the process no matter what; -3 quits the process
What it does: Stops the process with the ID number ProcessID
Launch the Terminal.
Type top. You will see a listing of all the processes currently running on your Mac (see Figure 9.7). Use the information in the table to identify the problematic process, such as one that is consuming an unreasonable amount of processing power. You can tell that a process has gone out of control by monitoring its percentage of CPU usage. If this number gets high and stays there, the process is likely hung. Because the information in the top window is dynamic, it is a good idea to open top in a Terminal window and then open another window to enter commands. In this example, assume that Internet Explorer has gone out of control (although as you can see in the figure, it is using only .9% of the CPU so it really doesn't have a problem at this point). In the figure, Internet Explorer's process ID number is 429.
Open a new shell by choosing File, New Shell (+N).
Type kill-9 429.
Switch back to the Terminal window showing top. You will no longer see Internet Explorer listed in the process list. You can use the same steps to kill any process by using the process ID of that process.
You can stop the top process by pressing Ctrl+C.
If the process you are trying to kill is an Administrator process, you will have to use the sudo -s command to get into the root account before you use the kill command.