Appendix F. Solaris httpd.conf File

Appendix F. Solaris httpd.conf File

The web server configuration described in Chapter 11 is based on the default httpd.conf file delivered with Solaris 8. That file is listed in its entirety in this appendix for those readers who want to see the complete configuration and examples of the individual directives described in Chapter 11.

Lines that begin with # are comments. Many of the comments describe the function and syntax of individual configuration directives. Use the comments as an additional source of information about the directives covered in Chapter 11.

The complete contents of the Solaris 8 httpd.conf file are listed here.

#

# Based upon the NCSA server configuration files originally by Rob McCool.

#

# This is the main Apache server configuration file.  It contains the

# configuration directives that give the server its instructions.

# See <URL:http://www.apache.org/docs/> for detailed information about

# the directives.

#

# Do NOT simply read the instructions in here without understanding

# what they do.  They're here only as hints.  If you are unsure

# consult the online docs. You have been warned.  

#

# After this file is processed, the server will look for and process

# /etc/apache/srm.conf and then /etc/apache/access.conf

# unless you have overridden these with ResourceConfig and/or

# AccessConfig directives here.

#

# The configuration directives are grouped into three basic sections:

#  1. Directives that control the operation of the Apache server process 

#     as a whole (the 'global environment').

#  2. Directives that define the parameters of the 'main' or 'default' 

#     server, which responds to requests that aren't handled by a virtual 

#     host. These directives also provide default values for the settings

#     of all virtual hosts.

#  3. Settings for virtual hosts, which allow Web requests to be sent to

#     different IP addresses or hostnames and have them handled by the

#     same Apache server process.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), 

# the server will use that explicit path.  If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"

# with ServerRoot set to "/usr/local/apache" will be interpreted by the

# server as "/usr/local/apache/logs/foo.log".

#



### Section 1: Global Environment

#

# The directives in this section affect the overall operation of Apache,

# such as the number of concurrent requests it can handle or where it

# can find its configuration files.

#



#

# ServerType is either inetd, or standalone.  Inetd mode is only supported 

# on Unix platforms.

#

ServerType standalone



#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# NOTE!  If you intend to place this on an NFS (or otherwise network)

# mounted filesystem then please read the LockFile documentation

# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);

# you will save yourself a lot of trouble.

#

# Do NOT add a slash at the end of the directory path.

#

ServerRoot "/var/apache"



#

# The LockFile directive sets the path to the lockfile used when Apache

# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or

# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at

# its default value. The main reason for changing it is if the logs

# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL

# DISK. The PID of the main server process is automatically appended to

# the filename. 

#

#LockFile /var/apache/logs/accept.lock



#

# PidFile: The file in which the server should record its process

# identification number when it starts.

#

PidFile /var/run/httpd.pid



#

# ScoreBoardFile: File used to store internal server process information.

# Not all architectures require this.  But if yours does (you'll know 

# because this file will be  created when you run Apache) then you *must* 

# ensure that no two invocations of Apache share the same scoreboard file.

#

ScoreBoardFile /var/run/httpd.scoreboard



#

# In the standard configuration, the server will process this file,

# srm.conf, and access.conf in that order.  The latter two files are

# now distributed empty, as it is recommended that all directives

# be kept in a single file for simplicity.  The commented-out values

# below are the built-in defaults.  You can have the server ignore

# these files altogether by using "/dev/null" (for Unix) or

# "nul" (for Win32) for the arguments to the directives.

#

#ResourceConfig /etc/apache/srm.conf

#AccessConfig /etc/apache/access.conf



#

# Timeout: The number of seconds before receives and sends time out.

#

Timeout 300



#

# KeepAlive: Whether or not to allow persistent connections (more than

# one request per connection). Set to "Off" to deactivate.

#

KeepAlive On



#

# MaxKeepAliveRequests: The maximum number of requests to allow

# during a persistent connection. Set to 0 to allow an unlimited amount.

# We recommend you leave this number high, for maximum performance.

#

MaxKeepAliveRequests 100



#

# KeepAliveTimeout: Number of seconds to wait for the next request from 

# the same client on the same connection.

#

KeepAliveTimeout 15



#

# Server-pool size regulation.  Rather than making you guess how many

# server processes you need, Apache dynamically adapts to the load it

# sees --- that is, it tries to maintain enough server processes to

# handle the current load, plus a few spare servers to handle transient

# load spikes (e.g., multiple simultaneous requests from a single

# Netscape browser).

#

# It does this by periodically checking how many servers are waiting

# for a request.  If there are fewer than MinSpareServers, it creates

# a new spare.  If there are more than MaxSpareServers, some of the

# spares die off.  The default values are probably OK for most sites.

#

MinSpareServers 5

MaxSpareServers 10



#

# Number of servers to start initially --- should be a reasonable ballpark

# figure.

#

StartServers 5



#

# Limit on total number of servers running, i.e., limit on the number

# of clients who can simultaneously connect --- if this limit is ever

# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.

# It is intended mainly as a brake to keep a runaway server from taking

# the system with it as it spirals down...

#

MaxClients 150



#

# MaxRequestsPerChild: the number of requests each child process is

# allowed to process before the child dies.  The child will exit so

# as to avoid problems after prolonged use when Apache (and maybe the

# libraries it uses) leak memory or other resources.  On most systems, 

# this isn't really needed, but a few do have notable leaks

# in the libraries. For these platforms, set to something like 10000

# or so; a setting of 0 means unlimited.

#

# NOTE: This value does not include keepalive requests after the initial

#       request per connection. For example, if a child process handles

#       an initial request and 10 subsequent "keptalive" requests, it

#       would only count as 1 request towards this limit.

#

MaxRequestsPerChild 0



#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, in addition to the default. See also the <VirtualHost>

# directive.

#

#Listen 3000

#Listen 12.34.56.78:80



#

# BindAddress: You can support virtual hosts with this option. This 

# directive is used to tell the server which IP address to listen to. It 

# can either contain "*", an IP address, or a fully qualified Internet 

# domain name. See also the <VirtualHost> and Listen directives.

#

#BindAddress *



#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO 

# you have to place corresponding `LoadModule' lines at this location so 

# the directives contained in it are actually available _before_ they are 

# used. Please read the file README.DSO in the Apache 1.3 distribution for 

# more details about the DSO mechanism and run `httpd -l' for the list of 

# already built-in (statically linked and thus always available) modules 

# in your httpd binary.

#

# Note: The order is which modules are loaded is important.  Don't change

# the order below without expert advice.

#

# Example:

# LoadModule foo_module libexec/mod_foo.so

LoadModule vhost_alias_module /usr/apache/libexec/mod_vhost_alias.so

LoadModule env_module         /usr/apache/libexec/mod_env.so

LoadModule config_log_module  /usr/apache/libexec/mod_log_config.so

LoadModule mime_magic_module  /usr/apache/libexec/mod_mime_magic.so

LoadModule mime_module        /usr/apache/libexec/mod_mime.so

LoadModule negotiation_module /usr/apache/libexec/mod_negotiation.so

LoadModule status_module      /usr/apache/libexec/mod_status.so

LoadModule info_module        /usr/apache/libexec/mod_info.so

LoadModule includes_module    /usr/apache/libexec/mod_include.so

LoadModule autoindex_module   /usr/apache/libexec/mod_autoindex.so

LoadModule dir_module         /usr/apache/libexec/mod_dir.so

LoadModule cgi_module         /usr/apache/libexec/mod_cgi.so

LoadModule asis_module        /usr/apache/libexec/mod_asis.so

LoadModule imap_module        /usr/apache/libexec/mod_imap.so

LoadModule action_module      /usr/apache/libexec/mod_actions.so

LoadModule speling_module     /usr/apache/libexec/mod_speling.so

LoadModule userdir_module     /usr/apache/libexec/mod_userdir.so

LoadModule alias_module       /usr/apache/libexec/mod_alias.so

LoadModule rewrite_module     /usr/apache/libexec/mod_rewrite.so

LoadModule access_module      /usr/apache/libexec/mod_access.so

LoadModule auth_module        /usr/apache/libexec/mod_auth.so

LoadModule anon_auth_module   /usr/apache/libexec/mod_auth_anon.so

LoadModule dbm_auth_module    /usr/apache/libexec/mod_auth_dbm.so

LoadModule digest_module      /usr/apache/libexec/mod_digest.so

LoadModule proxy_module       /usr/apache/libexec/libproxy.so

LoadModule cern_meta_module   /usr/apache/libexec/mod_cern_meta.so

LoadModule expires_module     /usr/apache/libexec/mod_expires.so

LoadModule headers_module     /usr/apache/libexec/mod_headers.so

LoadModule usertrack_module   /usr/apache/libexec/mod_usertrack.so

LoadModule unique_id_module   /usr/apache/libexec/mod_unique_id.so

LoadModule setenvif_module    /usr/apache/libexec/mod_setenvif.so

LoadModule perl_module        /usr/apache/libexec/libperl.so



#  Reconstruction of the complete module list from all available modules

#  (static and shared ones) to achieve correct module execution order.

#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]

ClearModuleList

AddModule mod_vhost_alias.c

AddModule mod_env.c

AddModule mod_log_config.c

AddModule mod_mime_magic.c

AddModule mod_mime.c

AddModule mod_negotiation.c

AddModule mod_status.c

AddModule mod_info.c

AddModule mod_include.c

AddModule mod_autoindex.c

AddModule mod_dir.c

AddModule mod_cgi.c

AddModule mod_asis.c

AddModule mod_imap.c

AddModule mod_actions.c

AddModule mod_speling.c

AddModule mod_userdir.c

AddModule mod_alias.c

AddModule mod_rewrite.c

AddModule mod_access.c

AddModule mod_auth.c

AddModule mod_auth_anon.c

AddModule mod_auth_dbm.c

AddModule mod_digest.c

AddModule mod_proxy.c

AddModule mod_cern_meta.c

AddModule mod_expires.c

AddModule mod_headers.c

AddModule mod_usertrack.c

AddModule mod_unique_id.c

AddModule mod_so.c

AddModule mod_setenvif.c

AddModule mod_perl.c



#

# ExtendedStatus controls whether Apache will generate "full" status

# information (ExtendedStatus On) or just basic information 

# (ExtendedStatus Off) when the "server-status" handler is called. The

# default is Off.

#

#ExtendedStatus On



### Section 2: 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition.  These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#



#

# If your ServerType directive (set earlier in the 'Global Environment'

# section) is set to "inetd", the next few directives don't have any

# effect since their settings are defined by the inetd configuration.

# Skip ahead to the ServerAdmin directive.

#



#

# Port: The port to which the standalone server listens. For

# ports < 1023, you will need httpd to be run as root initially.

#

Port 80



#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.  

#

# User/Group: The name (or #number) of the user/group to run httpd as.

#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".

#  . On HPUX you may not be able to use shared memory as nobody, and the

#    suggested workaround is to create a user www and use that user.

#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)

#  when the value of (unsigned)Group is above 60000; 

#  don't use Group #-1 on these systems!

#

User nobody

Group nobody



#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed.  This address appears on some server-generated pages, such

# as error documents.

#

ServerAdmin you@your.address



#

# ServerName allows you to set a host name which is sent back to clients 

# for your server if it's different than the one the program would get 

# (i.e., use "www" instead of the host's real name).

#

# Note: You cannot just invent host names and hope they work. The name you 

# define here must be a valid DNS name for your host. If you don't 

# understand this, ask your network administrator. If your host 

# doesn't have a registered DNS name, enter its IP address here.

# You will have to access it by its address (e.g., http://123.45.67.89/)

# anyway, and this will make redirections work in a sensible way.

#

#ServerName new.host.name



#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/var/apache/htdocs"



#

# Each directory to which Apache has access, can be configured with 

# respect to which services and features are allowed and/or disabled in 

# that directory (and its subdirectories). 

#

# First, we configure the "default" to be a very restrictive set of 

# permissions.  

#

<Directory />

    Options FollowSymLinks

    AllowOverride None

</Directory>



#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#



#

# This should be changed to whatever you set DocumentRoot to.

#

<Directory "/var/apache/htdocs">



#

# This may also be "None", "All", or any combination of "Indexes",

# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

    Options Indexes FollowSymLinks



#

# This controls which options the .htaccess files in directories can

# override. Can also be "All", or any combination of "Options", 

# "FileInfo", "AuthConfig", and "Limit"

#

    AllowOverride None



#

# Controls who can get stuff from this server.

#

    Order allow,deny

    Allow from all

</Directory>



#

# UserDir: The name of the directory which is appended onto a user's home

# directory if a ~user request is received.

#

UserDir public_html



#

# Control access to UserDir directories.  The following is an example

# for a site where these directories are restricted to read-only.

#

#<Directory /home/*/public_html>

#    AllowOverride FileInfo AuthConfig Limit

#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec

#    <Limit GET POST OPTIONS PROPFIND>

#        Order allow,deny

#        Allow from all

#    </Limit>

#    <Limit PUT DELETE PATCH PROPPATCH MKCOL COPY MOVE LOCK UNLOCK>

#        Order deny,allow

#        Deny from all

#    </Limit>

#</Directory>



#

# DirectoryIndex: Name of the file or files to use as a pre-written HTML

# directory index.  Separate multiple entries with spaces.

#

DirectoryIndex index.html



#

# AccessFileName: The name of the file to look for in each directory

# for access control information.

#

AccessFileName .htaccess



#

# The following lines prevent .htaccess files from being viewed by

# Web clients.  Since .htaccess files often contain authorization

# information, access is disallowed for security reasons.  Comment

# these lines out if you want Web visitors to see the contents of

# .htaccess files.  If you change the AccessFileName directive above,

# be sure to make the corresponding changes here.

#

# Also, folks tend to use names such as .htpasswd for password

# files, so this will protect those as well.

#

<Files ~ "^\.ht">

    Order allow,deny

    Deny from all

</Files>



#

# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with 

# each document that was negotiated on the basis of content. This asks 

# proxy servers not to cache the document. Uncommenting the following line 

# disables this behavior, and proxies will be allowed to cache the 

# documents.

#

#CacheNegotiatedDocs



#

# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever

# Apache needs to construct a self-referencing URL (a URL that refers back

# to the server the response is coming from) it will use ServerName and

# Port to form a "canonical" name.  With this setting off, Apache will

# use the hostname:port that the client supplied, when possible.  This

# also affects SERVER_NAME and SERVER_PORT in CGI scripts.

#

UseCanonicalName On



#

# TypesConfig describes where the mime.types file (or equivalent) is

# to be found.

#

TypesConfig /etc/apache/mime.types



#

# DefaultType is the default MIME type the server will use for a document

# if it cannot otherwise determine one, such as from filename extensions.

# If your server contains mostly text or HTML documents, "text/plain" is

# a good value.  If most of your content is binary, such as applications

# or images, you may want to use "application/octet-stream" instead to

# keep browsers from trying to display binary files as though they are

# text.

#

DefaultType text/plain



#

# The mod_mime_magic module allows the server to use hints from the

# contents of the file itself to determine its type.  The MIMEMagicFile

# directive tells the module where the hint definitions are located.

# mod_mime_magic is not part of the default server (you have to add

# it yourself with a LoadModule [see the DSO paragraph in the 'Global

# Environment' section], or recompile the server and include 

# mod_mime_magic as part of the configuration), so it's enclosed in an 

# <IfModule> container. This means that the MIMEMagicFile directive will 

# only be processed if the module is part of the server.

#

<IfModule mod_mime_magic.c>

    MIMEMagicFile /etc/apache/magic

</IfModule>



#

# HostnameLookups: Log the names of clients or just their IP addresses

# e.g., www.apache.org (on) or 204.62.129.132 (off).

# The default is off because it'd be overall better for the net if people

# had to knowingly turn this feature on, since enabling it means that

# each client request will result in AT LEAST one lookup request to the

# nameserver.

#

HostnameLookups Off



#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here.  If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog /var/apache/logs/error_log



#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn



#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined

LogFormat "%h %l %u %t \"%r\" %>s %b" common

LogFormat "%{Referer}i -> %U" referer

LogFormat "%{User-agent}i" agent



#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here.  Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#

CustomLog /var/apache/logs/access_log common



#

# If you would like to have agent and referer logfiles, uncomment the

# following directives.

#

#CustomLog /var/apache/logs/referer_log referer

#CustomLog /var/apache/logs/agent_log agent



#

# If you prefer a single logfile with access, agent, and referer 

# information (Combined Logfile Format) you can use the following 

# directive.

#

#CustomLog /var/apache/logs/access_log combined



#

# Optionally add a line containing the server version and virtual host

# name to server-generated pages (error documents, FTP directory listings,

# mod_status and mod_info output etc., but not CGI generated documents).

# Set to "EMail" to also include a mailto: link to the ServerAdmin.

# Set to one of:  On | Off | EMail

#

ServerSignature On



#

# Aliases: Add here as many aliases as you need (with no limit). The 

# format is   Alias fakename realname

#

# Note that if you include a trailing / on fakename then the server will

# require it to be present in the URL.  So "/icons" isn't aliased in this

# example, only "/icons/"..

#

Alias /icons/ "/var/apache/icons/"



<Directory "/var/apache/icons">

    Options Indexes MultiViews

    AllowOverride None

    Order allow,deny

    Allow from all

</Directory>



Alias /manual/ "/usr/apache/htdocs/manual/"



#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the realname directory are treated as applications and

# run by the server when requested rather than as documents sent to the 

# client. The same rules about trailing "/" apply to ScriptAlias 

# directives as to Alias.

#

ScriptAlias /cgi-bin/ "/var/apache/cgi-bin/"



#

# "/var/apache/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "/var/apache/cgi-bin">

    AllowOverride None

    Options None

    Order allow,deny

    Allow from all

</Directory>



#

# Redirect allows you to tell clients about documents which used to exist 

# in your server's namespace, but do not anymore. This allows you to tell 

# the clients where to look for the relocated document.

# Format: Redirect old-URI new-URL

#



#

# Directives controlling the display of server-generated directory 

# listings.

#



#

# FancyIndexing is whether you want fancy directory indexing or standard

#

IndexOptions FancyIndexing



#

# AddIcon* directives tell the server which icon to show for different

# files or filename extensions.  These are only displayed for

# FancyIndexed directories.

#

AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip



AddIconByType (TXT,/icons/text.gif) text/*

AddIconByType (IMG,/icons/image2.gif) image/*

AddIconByType (SND,/icons/sound2.gif) audio/*

AddIconByType (VID,/icons/movie.gif) video/*



AddIcon /icons/binary.gif .bin .exe

AddIcon /icons/binhex.gif .hqx

AddIcon /icons/tar.gif .tar

AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv

AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip

AddIcon /icons/a.gif .ps .ai .eps

AddIcon /icons/layout.gif .html .shtml .htm .pdf

AddIcon /icons/text.gif .txt

AddIcon /icons/c.gif .c

AddIcon /icons/p.gif .pl .py

AddIcon /icons/f.gif .for

AddIcon /icons/dvi.gif .dvi

AddIcon /icons/uuencoded.gif .uu

AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl

AddIcon /icons/tex.gif .tex

AddIcon /icons/bomb.gif core



AddIcon /icons/back.gif ..

AddIcon /icons/hand.right.gif README

AddIcon /icons/folder.gif ^^DIRECTORY^^

AddIcon /icons/blank.gif ^^BLANKICON^^



#

# DefaultIcon is which icon to show for files which do not have an icon

# explicitly set.

#

DefaultIcon /icons/unknown.gif



#

# AddDescription allows you to place a short description after a file in

# server-generated indexes.  These are only displayed for FancyIndexed

# directories.

# Format: AddDescription "description" filename

#

#AddDescription "GZIP compressed document" .gz

#AddDescription "tar archive" .tar

#AddDescription "GZIP compressed tar archive" .tgz



#

# ReadmeName is the name of the README file the server will look for by

# default, and append to directory listings.

#

# HeaderName is the name of a file which should be prepended to

# directory indexes. 

#

# The server will first look for name.html and include it if found.

# If name.html doesn't exist, the server will then look for name.txt

# and include it as plaintext if found.

#

ReadmeName README

HeaderName HEADER



#

# IndexIgnore is a set of filenames which directory indexing should ignore

# and not include in the listing.  Shell-style wildcarding is permitted.

#

IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t



#

# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) 

# uncompress information on the fly. Note: Not all browsers support this.

# Despite the name similarity, the following Add* directives have nothing

# to do with the FancyIndexing customization directives above.

#

AddEncoding x-compress Z

AddEncoding x-gzip gz tgz



#

# AddLanguage allows you to specify the language of a document. You can

# then use content negotiation to give a browser a file in a language

# it can understand.  Note that the suffix does not have to be the same

# as the language keyword --- those with documents in Polish (whose

# net-standard language code is pl) may wish to use "AddLanguage pl .po" 

# to avoid the ambiguity with the common suffix for perl scripts.

#

AddLanguage en .en

AddLanguage fr .fr

AddLanguage de .de

AddLanguage da .da

AddLanguage el .el

AddLanguage it .it



#

# LanguagePriority allows you to give precedence to some languages

# in case of a tie during content negotiation.

# Just list the languages in decreasing order of preference.

#

LanguagePriority en fr de



#

# AddType allows you to tweak mime.types without actually editing it, or 

# to make certain files to be certain types.

#

# For example, the PHP3 module (not part of the Apache distribution - see

# http://www.php.net) will typically use:

#

#AddType application/x-httpd-php3 .php3

#AddType application/x-httpd-php3-source .phps



AddType application/x-tar .tgz



#

# AddHandler allows you to map certain file extensions to "handlers",

# actions unrelated to filetype. These can be either built into the server

# or added with the Action command (see below)

#

# If you want to use server side includes, or CGI outside

# ScriptAliased directories, uncomment the following lines.

#

# To use CGI scripts:

#

#AddHandler cgi-script .cgi



#

# To use server-parsed HTML files

#

#AddType text/html .shtml

#AddHandler server-parsed .shtml



#

# Uncomment the following line to enable Apache's send-asis HTTP file

# feature

#

#AddHandler send-as-is asis



#

# If you wish to use server-parsed imagemap files, use

#

#AddHandler imap-file map



#

# To enable type maps, you might want to use

#

#AddHandler type-map var



#

# Action lets you define media types that will execute a script whenever

# a matching file is called. This eliminates the need for repeated URL

# pathnames for oft-used CGI file processors.

# Format: Action media/type /cgi-script/location

# Format: Action handler-name /cgi-script/location

#



#

# MetaDir: specifies the name of the directory in which Apache can find

# meta information files. These files contain additional HTTP headers

# to include when sending the document

#

#MetaDir .web



#

# MetaSuffix: specifies the file name suffix for the file containing the

# meta information.

#

#MetaSuffix .meta



#

# Customizable error response (Apache style)

#  these come in three flavors

#

#    1) plain text

#ErrorDocument 500 "The server made a boo boo.

#  n.b.  the (") marks it as text, it does not get output

#

#    2) local redirects

#ErrorDocument 404 /missing.html

#  to redirect to local URL /missing.html

#ErrorDocument 404 /cgi-bin/missing_handler.pl

#  N.B.: You can redirect to a script or a document using 

#  server-side-includes.

#

#    3) external redirects

#ErrorDocument 402 http://some.other_server.com/subscription_info.html

#  N.B.: Many of the environment variables associated with the original

#  request will *not* be available to such a script.



#

# The following directives modify normal HTTP response behavior.

# The first directive disables keepalive for Netscape 2.x and browsers 

# that spoof it. There are known problems with these browsers.

# The second directive is for Microsoft Internet Explorer 4.0b2

# which has a broken HTTP/1.1 implementation and does not properly

# support keepalive when it is used on 301 or 302 (redirect) responses.

#

BrowserMatch "Mozilla/2" nokeepalive

BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0



#

# The following directive disables HTTP/1.1 responses to browsers which

# are in violation of the HTTP/1.0 spec by not being able to grok a

# basic 1.1 response.

#

BrowserMatch "RealPlayer 4\.0" force-response-1.0

BrowserMatch "Java/1\.0" force-response-1.0

BrowserMatch "JDK/1\.0" force-response-1.0



#

# Allow status reports with the URL of http://servername/server-status

# Change the ".your_domain.com" to match your domain to enable.

#

#<Location /server-status>

#    SetHandler server-status

#    Order deny,allow

#    Deny from all

#    Allow from .your_domain.com

#</Location>



#

# Allow remote server configuration reports, with the URL of

#  http://servername/server-info (requires that mod_info.c be loaded).

# Change the ".your_domain.com" to match your domain to enable.

#

#<Location /server-info>

#    SetHandler server-info

#    Order deny,allow

#    Deny from all

#    Allow from .your_domain.com

#</Location>



#

# There are reports of people trying to abuse an old bug from pre-1.1

# days.  This bug involved a CGI script distributed as a part of Apache.

# By uncommenting these lines you can redirect these attacks to a logging 

# script on phf.apache.org.  Or, you can record them yourself, using the 

# script support/phf_abuse_log.cgi.

#

#<Location /cgi-bin/phf*>

#    Deny from all

#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi

#</Location>



#

# Proxy Server directives. Uncomment the following lines to

# enable the proxy server:

#

#<IfModule mod_proxy.c>

#ProxyRequests On

#

#<Directory proxy:*>

#    Order deny,allow

#    Deny from all

#    Allow from .your_domain.com

#</Directory>



#

# Enable/disable the handling of HTTP/1.1 "Via:" headers.

# "Full" adds the server version; "Block" removes outgoing Via: headers

# Set to one of: Off | On | Full | Block

#

#ProxyVia On



#

# To enable the cache as well, edit and uncomment the following lines:

# (no cacheing without CacheRoot)

#

#CacheRoot "/var/apache/proxy"

#CacheSize 5

#CacheGcInterval 4

#CacheMaxExpire 24

#CacheLastModifiedFactor 0.1

#CacheDefaultExpire 1

#NoCache a_domain.com another_domain.edu joes.garage_sale.com



#</IfModule>

# End of proxy directives.



### Section 3: Virtual Hosts

#

# VirtualHost: If you want to maintain multiple domains/hostnames on your

# machine you can setup VirtualHost containers for them.

# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>

# for further details before you try to setup virtual hosts.

# You may use the command line option '-S' to verify your virtual host

# configuration.



#

# If you want to use name-based virtual hosts you need to define at

# least one IP address (and port number) for them.

#

#NameVirtualHost 12.34.56.78:80

#NameVirtualHost 12.34.56.78



#

# VirtualHost example:

# Almost any Apache directive may go into a VirtualHost container.

#

#<VirtualHost ip.address.of.host.some_domain.com>

#    ServerAdmin webmaster@host.some_domain.com

#    DocumentRoot /www/docs/host.some_domain.com

#    ServerName host.some_domain.com

#    ErrorLog logs/host.some_domain.com-error_log

#    CustomLog logs/host.some_domain.com-access_log common

#</VirtualHost>



#<VirtualHost _default_:*>

#</VirtualHost>



#<IfModule mod_perl.c>

#

#<Location /perl-status>

#    SetHandler perl-script

#    PerlHandler Apache::Status

#    order deny,allow

#    deny from all

#    allow from yourhost

#</Location>

#

#</IfModule

>